2001 Okuma & Howa 2SP-25HG


Twin Spindle CNC Lathe


Control: Fanuc 18-T

BASE MACHINE CAPACITY:
MAXIMUM CUTTING DIAMETER.... 13.78"
MAXIMUM CUTTING LENGTH.........7.87"
DISTACE BETWEEN SPINDLES.......15.75"
SPINDLE CENTER FROM FLOOR.....47.44"

SPINDLES:
SPINDLE MOTORS
(FANUC ALPHA 16/6000 X 2 25 HP)
SPINDLE SPEED RANGE........45-4500 RPM
MACHINE EQUIPPED WITH:..10" 3- Jaw Chucks
SPINDLE NOSE.........................A2-6
DRAWTUBE THROUGH HOLE DIA..2.01"
FRONT BEARING DIAMETER.........3.94"
MAX. WEIGHT ON SPINDLE W/CHUCK...242 LBS

AXIS DRIVES:
X AXIS TRAVEL..............................6.89"
Z AXIS TRAVEL..............................8.27"
X AXIS THRUST & Z AXIS THRUST
1,543 / 1,708 FT/LBS

X & Z AXIS BALLSCREW DIAMETER....1.10"
X & Z AXIS RAPID TRAVERSE RATE....945 IPM
X AXIS POSITIONING ........+-0.0006" / 3.94"
X AXIS REPEATABILITY.......+-0.0001"
Z AXIS POSITIONING ........+- 0.0009" / 11.81"
Z AXIS REPEATABILITY.......+-0.0002"
FEEDRATES................. 0.0001 - 5.24 IPR
COOLING SYSTEM FOR BALLSCREW FORCED OIL

TURRETS:
TURRET TYPE
(FANUC ALPHA 6/2000 MOTOR)..V10 + V10
CURVIC COUPLING DIAMETER.........6.61"
CLAMPING FORCE................... 6,173 LBS
INDEXING TIME(TOOL-TOOL)...... 0.2 SEC.
STANDARD TOOL SIZE............ 1.0" X 1.0"
MAXIMUM BORING BAR SIZE... 1.75" OD

MACHINE SIZE & MASS:
HEIGHT......,,..............................126"
FLOOR SPACE REQ..........113.4" X 161.5"
WEIGHT.............................15,400 LBS

CNC LOADER INFORMATION:
3-AXIS SINGLE ARM CNC GANTRY LOADER WITH TURN OVER STATION , UP TO 4,724 IPM, (16) STATION RIGHT SIDE ROTARY STACKER UNIT
2-3 JAW LOADER UNITS.TURN-AROUND STATION
2-CHUCKS, TWO ACTUATORS.

STANDARD WORKPIECE MAXIMUMS WITH THE LOADER:DIAMETER................7.87"
Note: * 8.5" Standard Max without modifications

LENGTH................................4.72"
WEIGHT................................17.6.LBS

LOADER SPEEDS / TIMES:
LONGITUDINAL (L/R) A AXIS.....4724 IPM
A AXIS STROKE......................77.17"
VERTICAL B-AXIS....................4.724 IPM
B-AXIS STROKE......................33.46"

HORIZONTAL (IN/OUT) C AXIS..1575 IPM
C AXIS STROKE......................11.02"
LOADING TIME...................... 8 SECONDS
MINIMUM CYCLE TIME.............35 SECONDS

LOADER AND TURNOVER CHUCKS:
JAW STROKE..........................1.26"
ACTUATION METHOD.............. FORCED AIR

-EQUIPPED WITH-

AUTOMATIC GANTRY LOADER WITH (16) STATION PALLET POOL
HEAVY-DUTY SIDE DISCHARGE CHIP CONVEYOR,
COOLANT TANKS,
(2) 10” 3-JAW ROTO-SCHUNK HYDRAULC CHUCKS INSTALLED
ALL BOOKS AND MANUALS


*****Two Identical Machines Available*****

For Video 1: CLICK HERE

For Video 2: CLICK HERE



  


  

REQUEST A QUOTE FOR THIS MACHINE



Go back to the home page ----} HOME PAGE



Two Spade Machinery LLC, Phone: (802) 518-4161 & (802) 376-8157, Email: tobin@2spade.com, Web: www.2spade.com

Send Me An Email Call Me On Skype Like Me On Facebook Follow Me On Twitter Follow Me On Digg Join My LinkedIN Network Read My Blog On Wordpress Subscribe To My RSS Feed See My Videos On Youtube See What I Am Selling On Ebay Classifieds See My Photo Stream On Flickr